HyperOS 2.0 HyperOS 2.0 STABLE RELEASE

[xMarvin732]

I dont know if its just me but i did a clear flash of my Xiaomi 14 and Xiaomi SIM Activation Service is not working

 

[wee2000]

Try selecting "Advanced wipe" and choosing metadata, data, cache and dalvik cache.

If that doesn't work, you'll have to use the format_data_only script in order to reset.

i found out when this 0MB issue happened, the data partition are f2fs. However, when i set to ext2 then ext4, the 256Gb storage comes out showing again, so i need to re-install OS(xiaomi.eu). After that, it will be usable again, until i perform factory data reset. When i press factory data reset, again it will just loop me in twrp with the f2fs 0MB issue again.

i guess it must have something to do with the partition type. does the xiaomi.eu_NUWA_OS2.0.212.0.VMBCNXM_15 ROM supports EXT4? Is there a way to make it not to mess up when i press 'factory data reset'? I don't mind whichever partition type i use, ext or f2fs... Cos i'm gonna sell the phone & only wanted it to be global ROM. Don't want the new user to face issues when 'factory data reset' is choosen.

 

[ntlkr]

Is there a way to make it not to mess up when i press 'factory data reset'?

I don't think so. This is something the dev of your twrp image has to fix.

Don't want the new user to face issues when 'factory data reset' is choosen.

Why don't you just leave the stock recovery? If the new user is advanced enough to need twrp, they'll probably be able to flash it by themself.

 

[Kacper Skrzypek]

Cos i'm gonna sell the phone & only wanted it to be global ROM

Then use MiFlash, not TWRP.

 

[gogocar62]

Cos i'm gonna sell the phone & only wanted it to be global ROM. Don't want the new user to face issues when 'factory data reset' is choosen.

How to Install Stock ROM.

Installation in Miflash: Try using this version of Miflash: https://www.mediafire.com/file/99tudj9roum1kpo/MiFlash_2018.5.28.0.zip/file This version does not install, you just run it. - Download stock fastboot ROM (tgz.) https://hyperos.fans/en/devices - Extract and paste in the root of C...

xiaomi.eu

 

[wee2000]

I don't think so. This is something the dev of your twrp image has to fix.


Why don't you just leave the stock recovery? If the new user is advanced enough to need twrp, they'll probably be able to flash it by themself.

so by this, u mean i can flash it back to stock recovery, while maintaining global xiaomi.eu custom rom?

 

[wee2000]

How to Install Stock ROM.

Installation in Miflash: Try using this version of Miflash: https://www.mediafire.com/file/99tudj9roum1kpo/MiFlash_2018.5.28.0.zip/file This version does not install, you just run it. - Download stock fastboot ROM (tgz.) https://hyperos.fans/en/devices - Extract and paste in the root of C...

xiaomi.eu

so i can use miflash & flash global roms directly to my china version xiaomi 13 pro? with my current setup(ủnlöcked bootloader, China version, twrp), do i have to do some pre-requisite before flashing(like shall i make it back to stock recovery,etc...)? i don't wanna get it bricked.

 

[gogocar62]

It seems that you do not have sufficient knowledge and what you write is nonsense. If you have installed xiaomi.eu ROM it is not possible for the bootloader to be locked.
Yes, If you have a Chinese version of the device you can install the Global ROM, but you MUST NOT lock the bootloader.

 

[ntlkr]

so by this, u mean i can flash it back to stock recovery, while maintaining global xiaomi.eu custom rom?

Of course. Recovery is just a boot partition that is not related to the installed ROM.

Just get the recovery.img from the "images" folder in the ROM package you have installed, then flash it the same way you flashed twrp.

Though, if you're going to install global stock ROM, this is obviously not needed as the recovery will be reflashed with the global ROM.

 

[wee2000]

Of course. Recovery is just a boot partition that is not related to the installed ROM.

Just get the recovery.img from the "images" folder in the ROM package you have installed, then flash it the same way you flashed twrp.

Though, if you're going to install global stock ROM, this is obviously not needed as the recovery will be reflashed with the global ROM.

i can install global stock rom directly to my China version unit? like i just download stock ROM & extract & run the .bat file?

 

[ntlkr]

i can install global stock rom directly to my China version unit? like i just download stock ROM & extract & run the .bat file?

Yes. But as gogocar62 already pointed out, you must not lock the bootloader in that state.
So be careful to NOT run the flash_all_lock.bat, as it will cause a hardbrick and make your device permanently unusable. Instead use the flash_all.bat.
If you're using MiFlash, make sure to select the "flash all" option in bottom right corner, as it is set to "flash all and lock" by default.

 

[eleutherios0]

Then use MiFlash, not TWRP.

My xiaomi 14 is indian version. I'm afraid to install a global rom and lock it because it will brick. I know that nfc does not work in Indian rom. What do you think I should do?

 

[Igor Eisberg]

My xiaomi 14 is indian version. I'm afraid to install a global rom and lock it because it will brick. I know that nfc does not work in Indian rom. What do you think I should do?

You should not have off-topic discussions about stock ROM on our release thread.

 

[KamilKurde]

@ingbrzy Isn't https://sourceforge.net/projects/xi...eu_AURORA_OS2.0.212.0.VNACNXM_15.zip/download broken? It's only 3,1GB, both it's size and it's hash is different on https://miuipolska.pl/download/aurora/ than on sourceforge

 

[Wasko]

Is the file size correct?

 

[qaq0921188]

xiaomi.eu_AURORA_OS2.0.212.0.VNACNXM_15.zip		3.4 GB

The file is damaged, please upload it again, thank you